Installation Guide
HydroGloss, Ultimate HydroGloss, HydroSatin & HydroMatte, Professional install tips for the full clear lineup.
Welcome to the ONE PPF Family. Whether you're installing Ultimate HydroGloss or one of our Color Series films, this guide will help you achieve perfect, professional results every time. Remember, every new film takes a few installs to fully understand. Be patient, stay positive, and reach out to us anytime at sales@onepaintprotection.com
Built for Installers
The entire ONE PPF lineup, all four clear films and Color PPF alike, shares the same installer-friendly behavior. Master One, you've mastered them all. Our films are crafted for exceptional elasticity, smooth edge sealing, and precise adhesive control.
Clear PPF Lineup
- Ultimate HydroGloss: 8.5-mil High-Gloss TPU, 12-year warranty
- HydroGloss: 7.5-mil High-Gloss TPU, 10-year warranty
- HydroSatin: 7.5-mil Semi-Gloss Satin TPU, 10-year warranty
- HydroMatte: 7.5-mil True Matte TPU, 10-year warranty
- Ultra-hydrophobic topcoat across all four films
- Self-healing topcoat activated by heat or sunlight
- Edge-Seal Technology for long-term clarity
- No adhesive promoter required; distilled water tack solution
Color Series
- 105+ exclusive finishes with 10-year warranty
- Advanced TPU-based color infusion for long-term UV stability
- Consistent install characteristics across all finishes
- Next-generation elasticity for complex curves
Install Solution Recommendations
Slip Solution
Distilled water plus one of four approved lubricants per 32 oz: Johnson & Johnson Baby Shampoo 0.5 ml, Film-On 2.5 ml, APE Applepotion 5 ml, or Seventh Generation Free & Clear 2.5 ml. Any of these provides the ideal slip ratio for positioning and squeegee work.
Tack Solution
Use distilled water only. Apply moderate pressure to activate adhesion. ONE PPF films are designed to edge-seal with distilled water alone.
Post-Heating
After all edges are sealed, post-heat with a heat gun at a safe distance. Avoid overheating, ONE PPF films respond to moderate, even heat.
Liner & Storage Guidelines
- All Gloss and Satin films feature a cap sheet liner
- Store rolls tightly wound in a cool, dry environment
- Remove the clear liner before plotting to prevent static buildup
Plotting & Cutting Tips
- Remove cap sheet liner from gloss films before plotting
- Always perform a test cut to fine-tune depth settings
- Use fresh blades, dull blades cause drag and imprecise edges
Installation Tips
Unified Film Behavior
All four clear films (HydroGloss, Ultimate HydroGloss, HydroSatin, HydroMatte) and Color PPF share identical handling, same stretch, same slip curve, same adhesive control.
Controlled Stretch
Clean, even stretching with minimal color distortion. ONE PPF films hold shape under tension.
Edge Wrapping Made Easy
Edge-Seal Technology helps the film naturally self-wrap around edges with distilled water alone.
Cutting Precision
Light resistance and clean knife flow. The film responds predictably to blade pressure.
Vehicle Preparation
Remove mirrors, emblems, and handles for cleaner lines and better access to full panels.
Film Orientation
Align seams with factory body lines for an invisible, OEM-quality finish.
Final Notes
Disclaimer: This guide provides professional tips only and is not a substitute for certified training. Results depend on installer skill and conditions.
Contact: ONE PPF Support at sales@onepaintprotection.com
Ready for Hands-On Training?
Take your installation skills to the next level with ONE PPF certified training.